Wherever you need to deliver a device to a certain height, instead of setting up the scaffolding, you can use a telescopic lifter.
Foldable, lightweight, with electric drive, fine adjustment and exchangeable mounting platform. They are used for many tasks. After mounting microwave generators, they help dry walls or eliminate wood pests. The machine element, air conditioner or roller blind placed on the platform will be lifted to the appropriate height.
TL340 telescopic lifter
The lifter allows you to lift microwave devices or other materials weighing up to 120 kg, to a height of up to 3,3 m. No tools are needed to unfold and set it up.
Independently extendable legs with wheels make it easier to position the lifter vertically and move it. By folding one leg, the lifter can be placed directly against the wall.
Precisely controlled electric drive with speed regulation, extends telescopic elements to the desired height. Safety button and automatic overload system ensure safe operation.
The lifter is powered from a 230 VAC single-phase network. In the event of a power outage, raising and lowering can be done manually. The whole weighs only 21 kg, when folded it is 90 cm high.
TL520 telescopic lifter
The lifter allows you to lift microwave devices or other materials weighing up to 90 kg, to a height of up to 4,9 m. No tools are needed to unfold and set it up.
Independently extendable legs with wheels make it easier to position the lifter vertically and move it. By folding one leg, the lifter can be placed directly against the wall.
Precisely controlled electric drive with speed regulation, extends telescopic elements to the desired height. Safety button and automatic overload system ensure safe operation.
The lifter is powered from a 230 VAC single-phase network. In the event of a power outage, raising and lowering can be done manually. The whole weighs only 38 kg, when folded it is 110 cm high.
PP2 assembly platform
The PP2 platform is an element of telescopic lifter equipment. It is foreseen to cooperate with the microwave generators we produce.
The platform is applied to the telescopic jack of the lift without using tools. A maximum of two MG18-1500 generators can be attached to it. The generators are attached to the platform with M8 screws.
The platform with attached generators can be tilted in the range from -30 to +90 degrees. The angle of inclination is manually adjusted with a knob.